Research Publications

Year
Type
Faculty
Title
Link
2018JournalDr. Jayavel SDeepakkumar R., Jayavel S., Effect of local waviness in confining walls and its amplitude on vortex shedding control of the flow past a circular cylinder, , Ocean Engineering, 156, , 208 - 216.https://doi.org/10.1016/j.oceaneng.2018.03.018
2018JournalDr. Pandithevan PPANDITHEVAN P., PANDY N.V.M., PALANIVEL C., DEVELOPMENT OF IN-SITU TEMPERATURE PREDICTION MODELS FROM CADAVERIC HUMAN FEMUR FOR BONE DRILLING, Journal of Mechanics in Medicine and Biology, , , - .https://doi.org/10.1142/S0219519418500264
2018JournalDr. Jayavel SKumar R.S., Jayavel S., Forced Convective Air-Cooling Effect on Electronic Components of Different Geometries and Orientations at Flow Shedding Region, IEEE Transactions on Components, Packaging and Manufacturing Technology, , , - .https://doi.org/10.1109/TCPMT.2018.2797185
2018ConferenceDr. Shahul Hamid Khan BBalaji K., Shahul Hamid Khan B., Kinematic Analysis and Performance Evaluation of Novel PRS Parallel Mechanism, IOP Conference Series: Materials Science and Engineering, 310, 1, - .https://doi.org/10.1088/1757-899X/310/1/012007
2018JournalDr. Shahul Hamid Khan BSrinivasan S., Khan S.H., Multi-stage manufacturing/re-manufacturing facility location and allocation model under uncertain demand and return, International Journal of Advanced Manufacturing Technology, 94, 43317, 2847 - 2860.https://doi.org/10.1007/s00170-017-1066-7
2018JournalDr. Raja BUmesh V., Balavignesh S., Raja B., Single-Phase Convective Heat Transfer of Water and Aqua Ethylene Glycol Mixture in a Small-Diameter Tube, Journal of Engineering Thermophysics, 27, 1, 98 - 105.https://doi.org/10.1134/S1810232818010101
2017JournalDr. Sreekumar MMuthuswamy S., Molfino R., Student-Supervisor Relationship in the Process of Managing a Ph.D.: Engineering Perspective, Journal of Professional Issues in Engineering Education and Practice, 143, 4, - .https://doi.org/10.1061/(ASCE)EI.1943-5541.0000327
2017JournalDr. Narayanan SKumar P., Narayanan S., Gupta S., Bifurcation analysis of a stochastically excited vibro-impact Duffing-Van der Pol oscillator with bilateral rigid barriers, International Journal of Mechanical Sciences, 127, , 103 - 117.https://doi.org/10.1016/j.ijmecsci.2016.12.009
2017JournalDr. Jayavel SDeepakkumar R., Jayavel S., Tiwari S., A comparative study on effect of plain- and wavy-wall confinement on wake characteristics of flow past circular cylinder, Sadhana - Academy Proceedings in Engineering Sciences, 42, 6, 963 - 980.https://doi.org/10.1007/s12046-017-0649-1
2017JournalDr. Jayavel SSenthil kumar R., Jayavel S., Influence of flow shedding frequency on convection heat transfer from bank of circular tubes in heat exchangers under cross flow, International Journal of Heat and Mass Transfer, 105, , 376 - 393.https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.097
2017ConferenceDr. Sreekumar MPadhi D.R., Adeline Mellita R., Sreekumar M., A novel frame work of design realization course at IIITDM Kancheepuram: Critical evaluation, Smart Innovation, Systems and Technologies, 66, , 1039 - 1049.https://doi.org/10.1007/978-981-10-3521-0_88
2017JournalDr. Jayavel SDeepakkumar R., Jayavel S., Air side performance of finned-tube heat exchanger with combination of circular and elliptical tubes, Applied Thermal Engineering, 119, , 360 - 372.https://doi.org/10.1016/j.applthermaleng.2017.03.082
2017JournalDr. Sreekumar MBalasundaram M., Muthuswamy S., Implementation of role assignment and fault tree analysis for multi robot interaction, International Journal of Robotics and Automation, 32, 3, 214 - 223.https://doi.org/10.2316/Journal.206.2017.3.206-4448
2017JournalDr. Pandithevan PPandithevan P., Joshi M., Investigation of temperature and stress distribution on high speed machining of Ti6Al4V and 316L steel biomaterials using explicit dynamic analysis, Materials Science Forum, 889 MSF, , 84 - 89.https://doi.org/10.4028/www.scientific.net/MSF.889.84
2017JournalDr. Sreekumar MBalasundaram M., Muthuswamy S., Systematic approach for role assignment in mobile robots using leader-follower approach: Experimental observations, International Journal of Robotics and Automation, 32, 3, 224 - 233.https://doi.org/10.2316/Journal.206.2017.3.206-4578
2017JournalDr. Jayavel SDeepakkumar R., Jayavel S., Tiwari S., Cross flow past circular cylinder with waviness in confining walls near the cylinder, Journal of Applied Fluid Mechanics, 10, 1, 183 - 197.https://10.18869/acadpub.jafm.73.238.26148
2017ConferenceDr. Sreekumar MSagar K., Zlatanov D., Zoppi M., Nattero C., Muthuswamy S., Multi-goal path planning for robotic agents with discrete-step locomotion, Proceedings of the ASME Design Engineering Technical Conference, 5A-2017, , - .https://doi.org/10.1115/DETC2017-68011
2016JournalDr. Jayavel SGurunathan C., Gnanamoorthy R., Jayavel S., Effect of reinforcement forms in selectively reinforced polymer composite: temperature distribution under sliding contact condition, International Journal of Plastics Technology, 20, 2, 265 - 278.https://doi.org/10.1007/s12588-016-9154-3
2016JournalDr. Karthikeyan S SPhani Kumar K.V., Karthikeyan S.S., Miniaturised quadrature hybrid coupler using modified T-shaped transmission line for wide-range harmonic suppression, IET Microwaves, Antennas and Propagation, 10, 14, 1522 - 1527.https://doi.org/10.1049/iet-map.2016.0301
2016JournalDr. Senthilkumaran KShin S.-J., Woo J., Kim D.B., Kumaraguru S., Rachuri S., Developing a virtual machining model to generate MTConnect machine-monitoring data from STEP-NC, International Journal of Production Research, 54, 15, 4487 - 4505.https://doi.org/10.1080/00207543.2015.1064182
2016JournalDr. Sreekumar MSreekumar M., A Robot Manipulator with Adaptive Fuzzy Controller in Obstacle Avoidance, Journal of The Institution of Engineers (India): Series C, 97, 3, 469 - 478.https://doi.org/10.1007/s40032-015-0215-8
2016JournalDr. Narayanan Shttps://doi.org/10.1007/s11071-016-2697-1
2016JournalDr. Sreekumar MKoh K.H., Sreekumar M., Ponnambalam S.G., Hybrid electrostatic and elastomer adhesion mechanism for wall climbing robot, Mechatronics, 35, , 122 - 135.https://doi.org/10.1016/j.mechatronics.2016.02.001
2016ConferenceDr. Jayabal KJubin Antony J., Jayabal K., Rollover dynamics of a narrow tilting three-wheeled vehicle, MATEC Web of Conferences, 51, , - .https://doi.org/10.1051/matecconf/20165101002
2016ConferenceDr. Sreekumar MChandrasekar E., Sreekumar M., Implementation of a simplified modeling scheme for the control of SMA actuators using labview, ISMA 2015 - 10th International Symposium on Mechatronics and its Applications, , , - .https://doi.org/10.1109/ISMA.2015.7373491
2016JournalDr. Sreekumar MRajesh N.H., Sreekumar M., Design and simulation of a novel hybrid leaf spring with embedded cylindrical structures, International Journal of Heavy Vehicle Systems, 23, 2, 131 - 154.https://doi.org/10.1504/IJHVS.2016.075503
2016JournalDr. Shahul Hamid Khan BSrinivasan S., Sharma A.K., Khan S.H., Modelling and optimization of defective goods supply chain network with heuristics, International Journal of Operations and Quantitative Management, 22, 2, 177 - 187.
2016ConferenceDr. Sreekumar MMadhevan B., Sreekumar M., Analysis of communication delay and packet loss during localization among mobile robots, Advances in Intelligent Systems and Computing, 385, , 3 - 12.https://doi.org/10.1007/978-3-319-23258-4_1
2016ConferenceDr. Sreekumar MSagar K., Zlatanov D., Zoppi M., Nattero C., Sreekumar M., Path planning of a material handling agent with novel locomotion, Proceedings of the ASME Design Engineering Technical Conference, 4, , - .https://doi.org/10.1115/DETC2016-60054.pdf
2015JournalDr. Raja BBalachander P., Raja B., Investigation on the boiling heat transfer characteristics of R404A and R134a under stratified flow condition, Heat and Mass Transfer/Waerme- und Stoffuebertragung, 51, 6, 825 - 835.https://doi.org/10.1007/s00231-014-1456-4
2015JournalDr. Pandithevan PPandithevan P., Reverse engineering of complex biological body parts by squared distance enabled non-uniform rational B-spline technique and layered manufacturing, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229, 2, 150 - 163.https://doi.org/10.1177/0954411915570682
2015JournalDr. Sreekumar MJaiswal S., Muthuswamy S., Instability Analysis of Mosquito Fascicle under Compressive Load with Vibrations and Microneedle Design, Journal of Bionic Engineering, 12, 3, 443 - 452.https://doi.org/10.1016/S1672-6529(14)60135-9
2015JournalDr. Sreekumar MPandey G., Sreekumar M., Development of High Strength Bio-Composite Material for Light Weight Serial Robot Mechanisms, Procedia Computer Science, 76, , 512 - 521.https://doi.org/10.1016/j.procs.2015.12.328
2015JournalDr. Jayabal KKaliappan J., Menzel A., Modelling of non-linear switching effects in piezoceramics: A three-dimensional polygonal finite-element-based approach applied to oligo-crystals, Journal of Intelligent Material Systems and Structures, 26, 17, 2322 - 2327.https://doi.org/10.1177/1045389X14554135
2014JournalDr. Gnanamoorthy RGurunathan C., Gnanamoorthy R., Jayavel S., Prediction of frictional heating and temperature distribution in selective ceramic-reinforced polymer composite, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 228, 12, 1433 - 1442.https://doi.org/10.1177/1350650114541251
2014JournalDr. Raja BKarthik R., Harish Nagarajan R., Praveen K.S., Raja B., Experimental investigation on thermal conductivity enhancement of copper (II) oxide-DI water nanofluids, Journal of Engineering Thermophysics, 23, 4, 341 - 349.https://doi.org/10.1134/S1810232814040122
2014JournalDr. Sreekumar MKoh K.H., Sreekumar M., Ponnambalam S.G., Experimental investigation of the effect of the driving voltage of an electroadhesion actuator, Materials, 7, 7, 4963 - 4981.https://doi.org/10.3390/ma7074963
2014JournalDr. Arivazhagan AKumar V., Eakambaram A., Arivazhagan A., FEM analysis to optimally design end mill cutters for milling of Ti-6Al-4V, Procedia Engineering, 97, , 1237 - 1246.https://doi.org/10.1016/j.proeng.2014.12.402
2014ConferenceDr. Sreekumar MMadhevan B., Sreekumar M., A systematic implementation of role assignment in multi robots using leader follower approach: Analytical and experimental evaluation, 2014 13th International Conference on Control Automation Robotics and Vision, ICARCV 2014, , , 1792 - 1798.https://10.1109/ICARCV.2014.7064588
2013ConferenceDr. Arivazhagan AArivazhagan A., Mehta N.K., Jain P.K., Automated design and STEP-NC machining of impellers, Proceedings of the 37th International MATADOR 2012 Conference, , , 57 - 60.
2013JournalDr. Sreekumar MMadhevan B., Sreekumar M., Tracking algorithm using leader follower approach for multi robots, Procedia Engineering, 64, , 1426 - 1435.https://doi.org/10.1016/j.proeng.2013.09.224
2013JournalDr. Sreekumar MSagar S.N.K., Sreekumar M., Miniaturized flexible flow pump using SMA actuator, Procedia Engineering, 64, , 896 - 906.https://doi.org/10.1016/j.proeng.2013.09.166
2013JournalMr. Senthilkumar RSenthilkumar R., Prabhu S., Cheralathan M., Experimental investigation on carbon nano tubes coated brass rectangular extended surfaces, Applied Thermal Engineering, 50, 1, 1361 - 1368.https://doi.org/10.1016/j.applthermaleng.2012.05.040
2013JournalDr. Gnanamoorthy RCharles D.F., Gnanamoorthy R., Parag R., The effect of nanoclay reinforcement on the rolling contact fatigue behaviour of polyamide, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 227, 1, 84 - 95.https://doi.org/10.1177/1350650112456950
2012JournalDr. Sreekumar MMadhevan B., Sreekumar M., Structures and characteristics in reconfigurable modular robots, Advances in Reconfigurable Mechanisms and Robots I, , , 525 - 534.https://doi.org/10.1007/978-1-4471-4141-9_47
2012JournalDr. Gnanamoorthy RPrakash N.A., Gnanamoorthy R., Kamaraj M., Surface nanocrystallization of aluminium alloy by controlled ball impact technique, Surface and Coatings Technology, 210, , 78 - 89.https://doi.org/10.1016/j.surfcoat.2012.08.069
2012JournalDr. Gnanamoorthy RArun Prakash N., Gnanamoorthy R., Kamaraj M., Fretting wear behavior of controlled ball impact treated aluminium alloy under dry sliding condition, Surface and Coatings Technology, 207, , 450 - 460.https://doi.org/10.1016/j.surfcoat.2012.07.045
2012JournalDr. Gnanamoorthy RArun Prakash N., Gnanamoorthy R., Kamaraj M., Fretting wear behavior of fine grain structured aluminium alloy formed by oil jet peening process under dry sliding condition, Wear, 294-295, , 427 - 437.https://doi.org/10.1016/j.wear.2012.07.026
2012JournalDr. Raja BGodson L., Raja B., Mohan Lal D., Wongwises S., Convective Heat Transfer Characteristics of Silver-Water Nanofluid Under Laminar and Turbulent Flow Conditions, Journal of Thermal Science and Engineering Applications, 4, 3, - .https://doi.org/10.1115/1.4006027
2012JournalDr. Raja BKarthik R., Harish Nagarajan R., Raja B., Damodharan P., Thermal conductivity of CuO-DI water nanofluids using 3-ω measurement technique in a suspended micro-wire, Experimental Thermal and Fluid Science, 40, , 1 - 9.https://doi.org/10.1016/j.expthermflusci.2012.01.006
2012JournalDr. Raja BBalachander P., Raja B., Lal D.M., Evaporative heat transfer characteristics of R404A and R134a under varied heat flux conditions, Experimental Heat Transfer, 25, 3, 254 - 265.https://doi.org/10.1080/08916152.2011.623820
2012JournalDr. Jayavel SJayavel S., Tiwari S., Advection transport model of vortex enhanced heat transfer, International Journal of Heat and Mass Transfer, 55, 43445, 3273 - 3287.https://doi.org/10.1016/j.ijheatmasstransfer.2012.02.033
2012JournalDr. Raja BKarthik R., Nagarajan N.H., Raja B., Damodharan P., Measurement of thermal conductivity of fluids using 3-ω method in a suspended micro wire, Journal of Engineering Thermophysics, 21, 1, 60 - 68.https://doi.org/10.1134/S1810232812010067
2012JournalDr. Sreekumar MUsha S., Sreekumar M., Elastic behaviour of DEAP film in the development of actuators, Procedia Engineering, 41, , 1154 - 1161.https://doi.org/10.1016/j.proeng.2012.07.295
2012JournalDr. Sreekumar MPrasanth K.V.S.S.D., Sreekumar M., Design of a new biomimic flow pump using SMA actuators, Applied Mechanics and Materials, 110-116, , 2903 - 2910.https://doi.org/10.4028/www.scientific.net/AMM.110-116.2903
2011ConferenceMr. Pisharodhy H GPisharody H.G., An optimal design for piezoelectric energy harvesting system, 2011 IEEE PES International Conference on Innovative Smart Grid Technologies-India, ISGT India 2011, , , 244 - 247.https://doi.org/10.1109/ISET-India.2011.6145389
2011ConferenceMr. Deepak SDeepak S., Manoharan M., Mizuta H., Transport characteristics of nanoconstricted graphene with and with out point defects, Proceedings of the International Conference on Nanoscience, Engineering and Technology, ICONSET 2011, , , 300 - 303.https://doi.org/10.1109/ICONSET.2011.6167968
2011JournalDr. Raja BBalachander P., Raja B., Lal D.M., Investigation on boiling heat transfer characteristics of R404A in a 7.49-mm smooth horizontal tube, Experimental Heat Transfer, 24, 4, 355 - 369.https://doi.org/10.1080/08916152.2011.556309
2011JournalDr. Sreekumar MSait U., Muthuswamy S., Development of dielectric electroactive polymer actuator for robotic application, Recent Patents on Mechanical Engineering, 4, 2, 180 - 187.https://10.2174/2212797611104020180
2011JournalDr. Gnanamoorthy RTimmaraju M.V., Gnanamoorthy R., Kannan K., Effect of environment on flexural fatigue behavior of polyamide 66/hectorite nanocomposites, International Journal of Fatigue, 33, 4, 541 - 548.https://doi.org/10.1016/j.ijfatigue.2010.10.011
2011JournalDr. Gnanamoorthy RTimmaraju M.V., Gnanamoorthy R., Kannan K., Influence of imbibed moisture and organoclay on tensile and indentation behavior of polyamide 66/hectorite nanocomposites, Composites Part B: Engineering, 42, 3, 466 - 472.https://doi.org/10.1016/j.compositesb.2010.12.012
2010JournalDr. Gnanamoorthy RTimmaraju M.V., Gnanamoorthy R., Kannan K., Influence of organoclay on flexural fatigue behavior of polyamide 66/hectorite nanocomposites at laboratory condition, Polymer Composites, 31, 11, 1977 - 1986.https://doi.org/10.1002/pc.20997
2010JournalDr. Gnanamoorthy RArun Prakash N., Gnanamoorthy R., Kamaraj M., Dry sliding wear behaviour of oil jet peened aluminium alloy, AA6063-T6, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 224, 11, 1189 - 1196.https://doi.org/10.1243/13506501JET781
2010JournalDr. Gnanamoorthy RRajeesh K.R., Gnanamoorthy R., Velmurugan R., The effect of moisture content on the tensile behaviour of polyamide 6 nanocomposites, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 224, 4, 173 - 176.https://doi.org/10.1243/14644207JMDA316
2010JournalDr. Gnanamoorthy RArun Prakash N., Gnanamoorthy R., Kamaraj M., Microstructural evolution and mechanical properties of oil jet peened aluminium alloy, AA6063-T6, Materials and Design, 31, 9, 4066 - 4075.https://doi.org/10.1016/j.matdes.2010.04.057
2010JournalDr. Gnanamoorthy RRamkumar A., Gnanamoorthy R., Effect of nanoclay addition on the displacement-controlled flexural fatigue behavior of a polymer, Journal of Materials Science, 45, 15, 4180 - 4187.https://doi.org/10.1007/s10853-010-4508-2
2010JournalDr. Gnanamoorthy RCharles D.F., Gnanamoorthy R., Ravindran P., Rolling contact fatigue behavior of polyamide clay reinforced nanocomposite-Effect of load and speed, Wear, 269, 43319, 565 - 571.https://doi.org/10.1016/j.wear.2010.06.003
2010ConferenceDr. Gnanamoorthy RGrinspon A.S., Gnanamoorthy R., Finite element analysis of the effect of oil jet peening process in a material, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009, 3, , 791 - 798.https://doi.org/10.1115/DETC2009-86086
2010JournalDr. Gnanamoorthy RRajeesh K.R., Gnanamoorthy R., Velmurugan R., Effect of humidity on the indentation hardness and flexural fatigue behavior of polyamide 6 nanocomposite, Materials Science and Engineering A, 527, 12, 2826 - 2830.https://doi.org/10.1016/j.msea.2010.01.070
2010JournalDr. Gnanamoorthy RPrakash N.A., Gnanamoorthy R., Kamaraj M., Friction and wear behavior of surface nanocrystallized aluminium alloy under dry sliding condition, Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 168, 1, 176 - 181.https://doi.org/10.1016/j.mseb.2009.11.011
2010JournalDr. Sreekumar MSreekumar M., Nagarajan T., Singaperumal M., Kinetostatic analysis of a spatial compliant mechanism actuated by three shape memory alloy wires in differential form, Mechanics of Advanced Materials and Structures, 17, 3, 225 - 236.https://doi.org/10.1080/15376490903556600
2010JournalDr. Gnanamoorthy RSahaya Grinspan A., Gnanamoorthy R., Impact force of low velocity liquid droplets measured using piezoelectric PVDF film, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 356, 43160, 162 - 168.https://doi.org/10.1016/j.colsurfa.2010.01.005
2010JournalDr. Raja BRaja B., Lal D.M., Saravanan R., Stratified flow boiling heat transfer study of a HFC/HC refrigerant mixture in smooth horizontal tubes, Heat and Mass Transfer/Waerme- und Stoffuebertragung, 46, 3, 323 - 331.https://doi.org/10.1007/s00231-010-0573-y
2010JournalDr. Gnanamoorthy RRamkumar A., Kannan K., Gnanamoorthy R., Experimental and theoretical investigation of a polymer subjected to cyclic loading conditions, International Journal of Engineering Science, 48, 2, 101 - 110.https://doi.org/10.1016/j.ijengsci.2009.07.002
2010JournalDr. Gnanamoorthy RKirupasankar S., Gnanamoorthy R., Velmurugan R., Effect of apparent area, load, and filler content on sliding friction characteristics of polymer nanocomposites, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 224, 2, 133 - 138.https://doi.org/10.1243/13506501JET648
2010JournalDr. Raja BSekhar S.J., Raja B., Lal D.M., Thermal-fluid modeling of a visi-cooler, Computational Thermal Sciences, 2, 4, 359 - 370.https://doi.org/10.1615/ComputThermalScien.v2.i4.60
2009ConferenceDr. Gnanamoorthy RSahaya Grinspon A., Gnanamoorthy R., Finite element analysis of the effect of oil jet peening process in a material, Proceedings of the ASME Design Engineering Technical Conference, 3, , 791 - 798.https://doi.org/10.1115/DETC2009-86086
2009JournalDr. Sreekumar MSreekumar M., Singaperumal M., A generalized analytical approach to the coupled effect of SMA actuation and elastica deflection, Smart Materials and Structures, 18, 11, - .https://doi.org/10.1088/0964-1726/18/11/115026
2009JournalDr. Sreekumar MSreekumar M., Nagarajan T., Singaperumal M., Application of trained NiTi SMA actuators in a spatial compliant mechanism: Experimental investigations, Materials and Design, 30, 8, 3020 - 3029.https://doi.org/10.1016/j.matdes.2008.12.017
2009JournalDr. Gnanamoorthy RSenthilvelan S., Gnanamoorthy R., Efficiency of injection-moulded polymer composite spur gears, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223, 6, 925 - 928.https://doi.org/10.1243/13506501JET425
2009JournalDr. Gnanamoorthy RSahaya Grinspan A., Gnanamoorthy R., Development of a novel oil cavitation jet peening system and cavitation jet erosion in aluminum alloy, AA 6063-T6, Journal of Fluids Engineering, Transactions of the ASME, 131, 6, 613011 - 613018.https://doi.org/10.1115/1.3129134
2008JournalDr. Gnanamoorthy RRamkumar A., Gnanamoorthy R., Axial fatigue behaviour of polyamide-6 and polyamide-6 nanocomposites at room temperature, Composites Science and Technology, 68, 15-16, 3401 - 3405.https://doi.org/10.1016/j.compscitech.2008.09.027